UVC Signal![Numbers Numbers](/uploads/1/1/9/3/119353291/574554307.jpg)
General camera part number identification
Section 1
NOTE: some might not fit the general code meaning
General lens part number identification
Section 1 -Types of lens or pixel (pin hole / board / megapixel)
Section 2 -Focal length (mm)
Section 3 -Aperature (F)
Section 5 -Lens mount/size (Mxx)
Section 6 -Custom lens by serial number
General Led part number identification
Section 1 -Types of lens or pixel (pin hole / board / megapixel)
Section 3 -LED board inner-diameter
Section 4 -LED quantity
Section 5 -Lens mount/size (Mxx)
NOTE: some might not fit the general code meaning
General cable accessary part number identification
Motion Controls Robotics has a full stock of spare parts available for replacement parts and maintenance. As a FANUC Authorized Servicing Integrator, we are able to get you all the parts you need at a discounted rate. We also have FANUC certified servicing engineers available for preventive maintenance and repair needs.
Endoscope(< Φ8mm)
Inspection(> Φ8mm)
TelescopeDual CameraLow Light CameraButton & Screw CameraGlasses CameraConvert CameraQuickly connect the camera to the router Use the AP to quickly connect the camera to the router Add the device by serial number or by scanning the QR code Add the device in the same router with your phone network Cameras can view real-time video and video without connecting to an external network. Quickly connect the camera to the router Use the AP to quickly connect the camera to the router Add the device by serial number or by scanning the QR code Add the device in the same router with your phone network Cameras can view real-time video and video without connecting to an external network. Robot is a German imaging company known originally for clockwork cameras, later producing surveillance and bank security cameras. Originally created in 1934 as a brand of Otto Berning and Co., it became part of the Jenoptik group of optical companies in 1999. Improves generation of fake serial numbers for UVC cameras which do not provide a real serial number Previously some devices would assign such cameras a serial of 0:0 and fail to open and start streaming; Fixes ftcapp issue #638. Fixes a slew of bugs with the Vuforia camera monitor including.
The serial number begins with a combination of 3 letters, followed by a Series of numbers Please visit Robot registration for additional registration information or Register a robot now. There will be a black and white sticker with a barcode and the serial number.
CVBS SignalEndoscope(< Φ8mm)
Inspection(> Φ8mm)
MiniatureSecurityBullet CameraDomeLow Light CameraTelescopeButton & Screw CameraGlasses CameraConvert CameraAHD/CVI/TVIUVC Signal
CVBS Signal
UVC Signal
CVBS Signal
UVC Signal
CVBS Signal
UVC Signal
![Numbers Numbers](/uploads/1/1/9/3/119353291/574554307.jpg)
CVBS Signal
UVC Signal
CVBS Signal
Endoscope(< Φ8mm)
Inspection(> Φ8mm)
TelescopeDual CameraLow Light CameraButton & Screw CameraGlasses CameraConvert CameraCCDAccessories
CMOS
ReceiverAntenna
DC Auto IRISManual IRISHidden Lens Kit
General camera part number identification
1 | - | 2 | 3 | 4 | - | 5 | - | 6 | 7 |
Section 1
CMOS-analog | |
MO | Mini 4pin(male) |
MJ | Phone plug(D2.5mm) |
MQ | Waterproof 4pin(male) |
MX | Low light type-mini 4pin(male) |
ED | Rigid camera type (endoscope) |
HS | Hidden type |
KO | Wireless kit (included camera, transmitter, receiver) |
KDO | Wireless kit (included camera, transmitter, receiver) |
AHD | AHD signal-mini 4pin(male) |
CVI | CVI signal-mini 4pin(male) |
TVI | TVI signal-mini 4pin(male) |
PVI | PVI signal-mini 4pin(male) |
CMOS-digital | |
SMD | USB 3.0 connector (A type)/USB 2.0 interface ( 2588 chip) /30fps |
MD | USB 2.0 A type ( 2588 chip) |
MM | Micro USB OTG B type ( 2588 chip) |
MT | USB type C ( 2588 chip) |
SFD | USB 3.0 connector (A type)/USB 2.0 interface /snapshot & freeze function ( 2588 chip) |
FD | USB 2.0 A type and snapshot & freeze function ( 2588 chip) |
FM | Micro USB OTG B type and snapshot & freeze function ( 2588 chip) |
FT | USB type C (UVC) and snapshot & freeze function ( 2588 chip) |
STD | USB 3.0 connector (A type)/USB 2.0 interface ( 1688 chip) / 30fps |
TD | USB 2.0 A type ( 1688 chip) |
TM | Micro USB OTG B type ( 1688 chip) |
TT | USB type C ( 1688 chip) |
SFTD | USB 3.0 connector (A type)/USB 2.0 interface(UVC) snapshot & freeze function ( 1688 chip) |
FTD | USB 2.0 A type (UVC) snapshot & freeze function ( 1688 chip) |
FTM | Micro USB OTG B type and snapshot & freeze function ( 1688 chip) |
FTT | USB type C (UVC) snapshot & freeze function ( 1688 chip) |
SXD | USB 3.0 connector (A type)/USB 2.0 interface ( with external 1688 chip) / 30fps |
XD | USB 2.0 A type ( with external 1688 chip) |
XM | Micro USB 2.0 OTG B type ( with external 1688 chip) |
XT | USB 2.0 type C ( with external 1688 chip) |
SSD | USB 3.0 A type( 2630 chip)/60fps |
SD | USB 2.0 A type ( 2630 chip)/30fps |
SM | Micro USB 2.0 OTG B type ( 2630 chip)/30fps |
ST | USB 2.0 type C ( 2630 chip)/30fps |
SYD | USB 3.0 A type ( with external 2630 chip)/60fps (model: B31105 series) ; USB 3.0 A type ( with external M5288 chip on connector)/30fps (model: B36305 series) |
TYD | USB 3.0 A type ( with external 2630 chip on connector)/60fps (model: B31105 series) ; USB 3.0 A type ( with external M5288 chip on connector)/30fps (model: B36305 series) |
YD | USB 2.0 A type ( with external 2630 chip)/30fps |
YM | Micro USB 2.0 OTG B type ( with external 2630 chip)/30fps |
YT | USB 2.0 type C ( with external 2630 chip)/30fps |
SFXD | USB 3.0 connector (UVC) snapshot & freeze function ( with external 1688 chip) / 30fps |
FXD | USB 2.0 A type (UVC) snapshot & freeze function ( with external 1688 chip) |
FXM | Micro USB OTG B type and snapshot & freeze function ( with external 1688 chip) |
FXT | USB type C (UVC) snapshot & freeze function ( with external 1688 chip) |
SRD | Robot camera series USB 3.0 connector (A type)/USB 2.0 interface ( 1688 chip) |
RD | Robot camera series USB 2.0 A type ( 1688 chip) |
RM | Robot camera series Micro USB OTG B type ( with external 1688 chip) |
RT | Robot camera series USB type C ( with external 1688 chip) |
HSD | Hidden type(USB A connector) |
HSM | Hidden type(Micro USB OTG B type connector) |
HST | Hidden type(USB A connector) |
EDD | Rigid camera type (endoscope) and USB 2.0 A type connector |
KD | Sensor board to power board have cable length 30cm |
SVD | USB 3.0 A type ( with external 5830 chip)/60fps |
SVT | USB type C ( with external 5830 chip)/60fps |
HD | USB type A ( with external H.264 chip)/30fps |
HM | Micro USB type B ( with external H.264 chip)/30fps |
HT | USB type C ( with external H.264 chip)/30fps |
THD | USB 3.0 A type ( with M5288 chip)/30fps |
THT | USB 3.0 USB type C ( with M5288 chip)/30fps |
Section 2 | |
B | module type |
BL | module type(left side view) |
T | tube type |
V | tube type with LED and dimmer |
S | body type (built in epoxy resin) |
SL | body type side view(built in epoxy resin) |
N | Square type (hidden) |
NS | Small square type (hidden) with bracket |
P | Square type (plastic enclosure) with bracket |
F | Square type (iron enclosure) with bracket |
Section 1 is 'MO', camera connector will be RCA(male)/DC JACK (* available for Tube type) | |
L | Snake type (with flexible iron pipe protect cable) |
R | Bullet type with bracket |
M | with motion detect function |
W | Waterproof type |
FPC | Flexible printed circuit camera |
TCAM | Dual camera |
Section 3 - Camera series and camera size |
Section 4 | |
W | 3 wires output |
SW | with thread on tube back (available for MO-T3506 series) |
LW | 4 wires output(with LED) |
C | Camera with cable length |
Concealed lid (available for R5910C-3G, R5610C-3G ) | |
LC | Camera with cable length and LED |
LH | Camera with cable length and MS LED(high brightness LED) |
LSC | Camera with cable length and LED and with thread on tube back(available for MO-T3506 series) |
L | Camera with LED |
U | Up view |
D | Down view |
A | with microphone |
AG | with microphone (MS-8300) |
AD | with microphone (MS-3300) |
K | Camera frame rate is fixed at 15 fps |
KL | Camera frame rate is fixed at 15 fps and with LED |
E | with OSD function(analog), GPIO pin(digital) |
J | Camera frame rate is fixed at 60 fps (available for MD-T1003 series) |
R | Round type (available for MD-B31114, TD-B31109, TD-B20908) |
S | Straight cable (available for MD-N41xx series) |
Q | Spring cable (available for MD-N41xx series) |
Section 5 - Lens code which is used in the camera Section 6 - Camera system (NTSC/PAL or EIA/CCIR) available for analog series Section 7 - Custom camera by serial number |
General lens part number identification
1 | 2 | 3 | 4 | - | 5 | - | 6 |
L | G type lens, Board Lens |
LP | Pin hole lens |
1M | 1 Megapixel Lens |
2M | 2 Megapixel Lens |
3M | 3 Megapixel Lens |
5M | 5 Megapixel Lens |
8M | 8 Megapixel Lens |
12M | 12 Megapixel Lens |
Section 3 -Aperature (F)
Robot Serial Number
Section 4 -Lens coating (AR/IR)Section 5 -Lens mount/size (Mxx)
Section 6 -Custom lens by serial number
Driver Robot Serial
NOTE: some might not fit the general code meaningGeneral Led part number identification
1 | - | 2 | 3 | 4 | 5 |
LS | LED series |
Robot Camera Serial Numbers List
Section 2 -LED board out-diameterSection 3 -LED board inner-diameter
Section 4 -LED quantity
Section 5 -Lens mount/size (Mxx)
Vector Robot Serial Number
H | High intensity LED |
NOTE: some might not fit the general code meaning
General cable accessary part number identification
1 | - | 2 | 3 | 4 | 5 | - | 6 |
Section 1 -Cable types(AF-XXXXX)
Section 2 -Total cable length (three digits)
Section 3 -Front side connector
Section 4 -End side connector
Section 5 -Second end side connector (if needed)
Section 6 -Serial number
NOTE: some might not fit the general code meaning
Section 2 -Total cable length (three digits)
Section 3 -Front side connector
Section 4 -End side connector
Section 5 -Second end side connector (if needed)
Section 6 -Serial number
NOTE: some might not fit the general code meaning
Motion Controls Robotics has a full stock of spare parts available for replacement parts and maintenance. As a FANUC Authorized Servicing Integrator, we are able to get you all the parts you need at a discounted rate. We also have FANUC certified servicing engineers available for preventive maintenance and repair needs.
*If you do not find the part you are searching for email customer service or call
419-334-5886
419-334-5886
Below are search parameters to help narrow the results to find the part(s) you are needing for your FANUC robot. If you know the FANUC specification number you can search by that as well.
*If the table takes too long to load, refresh the browser and the table will load quickly.
it | Type of Part | Enter Controller (Ex. R-30iB) | Enter Robot Name (Ex. M-20iB) | Robot Model | Axis | FANUC Specification Number | Part Name | Remarks | Other |
---|---|---|---|---|---|---|---|---|---|
A1 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3, J4, J5 | A660-8017-T336 | K201 | J1-J5 PULSECODER+EE | |
A2 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3, J4, J5 | A660-8017-T337 | K202 | J1-J5 PULSECODER | |
A3 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3, J4, J5 | A660-8017-T338 | K203 | J1-J5 PULSECODER+EE+SERVO HAND | |
A4 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3, J4, J5 | A660-8017-T345 | K221 | J1-J5 POWER | |
A5 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | A660-2007-T181 | K232 | AS | ||
A6 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3, J4, J5 | A660-8017-T339 | K251 | J1-J5 POWER+SERVO HAND | |
A7 | FANUC Cable | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | A05B-1043-D001 | K301 | Camera | ||
A8 | FANUC Motor | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1, J2, J3 | A06B-0268-B605#S000 | J1, J2, J3 | aiS30/4000 | |
A9 | FANUC Motor | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J4,J5 | A06B-0235-B605#S000 | J4,J5 | aiS8/4000 | |
A10 | FANUC Reducer | R-30iB, R-30iB Plus/R-30iA/R-J3iB | M-410iB | 140H | J1 | A97L-0218-0896#400C3-30 | J1 | ||
Type of Part | Enter Controller (Ex. R-30iB) | Enter Robot Name (Ex. M-20iB) | Robot Model | Axis | FANUC Specification Number |